Pork Products

Pork, cured, ham, shank, bone-in, separable lean only, heated, roasted

Parameters

Sodium: 828 mg
Salt, derived: 2.10 %
Water: 67.5 g
Brine concentration: 3.02 %
Moisture-protein ratio: 2.55 : 1

USDA FoodData Central, SR Legacy, FDC ID 169175. All values are per 100 g of the food as described. Retrieved 2026-09-04. Source record

How the derived figures were obtained

salt %      = sodium mg / 1000 x 2.5420 / 100 x 100
            = 828 / 1000 x 2.5420 = 2.105 g per 100 g
brine %     = 100 x salt / (salt + water)     [FSIS-GD-2016-0002]
            = 100 x 2.105 / (2.105 + 67.5) = 3.024 %
MPR         = water % / protein % = 67.5 / 26.5 = 2.547 : 1

Full composition, per 100 g

Nutrient	Value	Unit
Energy	139.0	kcal
Calcium	7.00	mg
Potassium	378.0	mg
Total fat	3.68	g
Water	67.5	g
Cholesterol	70.0	mg
Iron	1.54	mg
Sodium	828.0	mg
Protein	26.5	g
Saturated fat	1.13	g
Carbohydrate	0.68	g

What these figures do and do not say

The brine concentration above is computed from this food's own sodium and water using the FSIS formula, 100 x salt / (salt + water). It is a description of a finished commercial product, not a target. FSIS cites 10 percent brine after equalisation as the figure that prevents Staphylococcus aureus enterotoxin production during warm drying, and 9 CFR 319.106(b)(4) requires not less than 10 percent for a dry cured ham made without nitrate or nitrite.

Water activity cannot be computed from composition. It is a measurement, and it is the measurement that decides shelf stability. The published limits are 0.85 in air and 0.91 vacuum packed, both from FSIS-GD-2014-0010.

Nearby entries

Source: USDA FoodData Central, SR Legacy, published 2019-04-01. Retrieved 2026-09-04.